XC90

Oil replace in Haldex AWD system (Active On Demand Coupling )

Parts

  • Transmission oil 1L – P/N 31325136 (SAE 80W)
  • Filter kit (screw, cap, o-ring, filter) – P/N 30787687

Instruction

Haldex is in rear part of the car. Unscrew the screw number 12 (it’s in front when looking at haldex from the right side of car)

xc90-haldex-1

Suck oil with syringe and flex pipe. It should be around 300-400ml.

Fill up to the cup with new oil using the syringe. Should be around 500ml.

xc90-haldex-2

Haldex drain plug

Torque: Oil plug, Active On-Demand Coupling, 35 Nm

Carry out a road test (to flush remaining debris from gears).

Unscrew the screw number 12 again.

Suck oil with syringe and flex pipe.

Fill up to the cup again with new oil using the syringe.

Remove and replace the filter. It’s 18 on the picture.

Torque: Oil plug, Active On-Demand Coupling, 35 Nm

Carry out a road test.

Unscrew the screw number 12 again.

Fill up to the cup with new oil using the syringe.

Once filled up to the cup suck 40 ml with syringe.

Torque: Oil plug, Active On-Demand Coupling, 35 Nm

Leave a Reply

Your email address will not be published. Required fields are marked *